Rexroth A11VLO260LRDH2/11R-NZD12K02 Axial piston variable pump
With over 10170 Shanghai Faode Hydraulic Equipment Co., Ltd. full-service stores, our Rexroth A11VLO260LRDH2/11R-NZD12K02 Axial piston variable pump inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | Rexroth |
| Model Number: | A11VLO260LRDH2/11R-NZD12K02 |
| Weight: | 95.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Model No.: | 4520V42A5-1DC22R |
| Port Size: | 3 1/2 |
| Port Type: | Flange |
| Shaft Key: | 5/16 in |
| Pilot Type: | Standard Pilot |
Product Details
| Weight | 95.0 LB |
| Mounting | Flange Mount |
| Rotation | Right Hand (CW) |
| Model No. | 4520V42A5-1DC22R |
| Port Size | 3 1/2 |
| Port Type | Flange |
| Shaft Key | 5/16 in |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 1.25 in |
| Shaft Type | Straight w/ Key |
| Pump Series | 4520V |
| Shaft Length | 2 7/16 in |
| Seal Material | Buna-N |
| Max. RPM [Max | 1800 |
| Minor Diameter | N/A |
| Mounting Flange | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | N/A |
| Cover End RPM [Max | 1800 |
| Shaft End RPM [Max | 1800 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| Major Diameter [Min | N/A |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Manufacturer Part No. | 4520V42A5-1DC22R |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 2500 |
| GPM @ 1,800 rpm, Cover End | 7.5 |
| GPM @ 1,800 rpm, Shaft End | 63 |
| Integral Valve Configuration | N/A |
| Port Orientation - Cover End | Outlet 45° CW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End | 3/4 in Code 61 |
| Pressure Port Size, Shaft End | 1 1/2 in Code 61 |
| Displacement Cover End (cu in/revolution) | 1.1 |
| Displacement Shaft End (cu in/revolution) | 8.4 |